12-4.4 Dynamic Table
Navigate to the Security > ARP Inspection > Dynamic Table menu path to display the Dynamic ARP
Inspection Table.
Parameters:
Port: Select the port being configured.
VLAN ID: The VID for this instance.
MAC Address: Enter the MAC address for the entry.
IP Address: Enter the IP address for the entry.
Buttons:
Apply: Click to save changes when done configuring.
Reset: Click to undo any changes made locally and revert to previously saved values.
Previous: Click the button to display the previous set of entries.
Next: Click the button to display the next set of entries.
To Next Page
Loading...