Device data
Click a device in the Topology View to display its captured data:
Device data parameters
Device Type: e.g., SWITCH, PC, IP Camera, IP Phone, AP (Access Point).
Device Type is displayed automatically. If an unknown type is
detected, you can still select its type from a pre-defined list. An IP
device recognized as a DMS Control switch supports "Upgrade" and
"Find Switch" functions.
An IP device recognized as a PoE device supports "Upgrade" and
"Reboot" functions.
An IP device recognized as an IP Camera via the ONVIF
protocol will
support the "Streaming" function.
Device Name: e.g., SM16TAT2SA. Create your own Device Name or alias
for easy management such as "1F_Lobby_Cam1".
Model Name: e.g., SM16TAT2SA.
Mac Address: e.g., 00-40-c7-1c-cb-6e; displayed automatically by DMS.
IP Address: e.g., 192.168.1.77; displayed automatically by DMS.
Http port: e.g., 80
PoE Used: e.g., 2 Watts; displayed automatically by DMS.
Login icon: Click to display the login window.
Upgrade icon: Click to display a window in which you can enter a Tftp Server IP address and the name
of a firmware file to upgrade to.
Find Switch icon: Click to flash the device LEDs for 15 seconds to help find the device. Click OK to clear
the message.
Parent Node / Undo Parent: click to toggle between switching the selected device with its parent
node device and back.
To Next Page
Loading...