PoE Config icon: Click to display a window in which you can enable or disable PoE Auto Checking
globally, and enable or disable PoE Mode on a port-by-port basis.
PoE Reboot: Click to re-boot PoE.
PoE Supply and PoE Used: displayed automatically by DMS.
Dashboard icon: Click to display the dashboard.
Notification icon: Click to display an editable message area.
Unknown Device parameters
You can click on an unknown device ( ) to display its
discovered data (see descriptions above). If an unknown type is detected,
you can still select its type from a pre-defined list.
To Next Page
Loading...