6-6.2 Group Name to VLAN mapping Table
Navigate to Switch > VLAN Management > Protocol-based VLAN > Group to VLAN to display the
Group Name to VLAN mapping Table. Add new entries and view or edit existing table entries.
Parameter descriptions:
Delete: To delete a private VLAN entry, check this box. The entry will be deleted during the next apply.
Group Name: Displays the name for each entry.
VLAN ID: Displays the VLAN ID (VID) for the entry.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
Add New Entry: Click the button to add a new entry. An empty row is added to the table, and the new
member can be configured as needed.
To Next Page
Loading...