6-7 IP Subnet-based VLAN
Navigate to Switch > VLAN Management > Protocol-based VLAN > IP Subnet-based VLAN to display
the IP Subnet-based VLAN Membership Configuration table. Here you can add new entries and view or
edit existing table entries.
Parameter descriptions:
Delete: To delete an entry, check this box. The entry will be deleted during the next apply.
IP Address: Enter an IP address for each entry.
Mask Length: Enter the mask length for each entry.
VLAN ID: Enter the VID for this new entry (1-4095).
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
Add New Entry: Click the button to add a new entry. An empty row is added to the table, and the new
member can be configured as needed.
To Next Page
Loading...