Port Members: Indicates the Voice VLAN port mode operation. You must disable the MSTP feature
before you enable Voice VLAN. It can avoid the conflict of ingress filtering. Select which port that you
want to enable the Voice VLAN mode operation.
Port Configuration
Port: The switch port number of the Voice VLAN port.
Mode: Indicates the Voice VLAN port mode. When the port mode isn't equal disabled, we must disable
MSTP feature before we enable Voice VLAN. It can avoid the conflict of ingress filtering. Possible port
modes are:
Auto: Enable auto detect mode. It detects whether there is VoIP phone attached to the specific
port and configures the Voice VLAN members automatically.
Forced: Force join to Voice VLAN.
Security: Indicates the Voice VLAN port security mode. When the function is enabled, all
non-telephonic MAC addresses in the Voice VLAN will be blocked for 10 seconds. Possible security
modes are:
Enabled: Enable Voice VLAN security mode operation.
Disabled: Disable Voice VLAN security mode operation.
Discovery Protocol: Indicates the Voice VLAN port discovery protocol. It will only work when auto
detect mode is enabled. We should enable LLDP feature before configuring discovery protocol to
"LLDP" or "Both". Changing the discovery protocol to "OUI" or "LLDP" will restart the auto detect
process. Possible discovery protocols are:
OUI: Detect telephony device by OUI address.
LLDP: Detect telephony device by LLDP.
Both: Both OUI and LLDP.
Delete: Click to do delete an existing Voice VLAN entry.
Add New Entry: Click to add a new entry in Voice VLAN configuration table.
Buttons
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...