6-6.1 Voice VLAN OUI Configuration Ta b l e
The section describes how to configure the Voice VLAN OUI table. The maximum entry number is 16.
Modifying the OUI table will restart auto detection of the OUI process. An Organizationally Unique
Identifier (OUI) is a 24-bit number that uniquely identifies a vendor, manufacturer, or other
organization. The IEEE Public OUI list is at http://standards-oui.ieee.org/oui/oui.txt
.
Web Interface
To configure Port Isolation configuration in the web interface:
1. Click Voice VLAN and OUI.
2. Click the Add New Entry button.
3. Enter a Telephony OUI and Description for each instance.
4. Click the Apply button.
Figure 6-6: The Voice VLAN OUI Table
Parameter descriptions:
Telephony OUI: A telephony OUI address is a globally unique identifier assigned to a vendor by IEEE.
It must be 6 characters long and the input format is "xx-xx-xx" (where x is a hexadecimal digit).
Description: The description of OUI address. Normally, it describes which vendor telephony device it
belongs to. The allowed string length is 0 to 32.
Delete: Click to delete an existing Voice VLAN OUI entry.
Add New Entry: Click to add a new entry in Voice VLAN OUI table. An empty row is added to the table
to configure the Telephony OUI and Description.
Buttons
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...