To Next Page

To Previous Page

 ~!F

Description

This command inquires all about files resident in the printer memory, and fonts installed in the

memory module. The filename are returned in ASCII characters. Each file name ends with 0x0D. The

ending character is 0x1A. Entering this command multiple times will cycle through the files resident on

memory.

Syntax

~!F

Parameter Description

None N/A

Example

~!F

Other manuals for TSC TDP-247

Questions and Answers:

Need help?

Do you have a question about the TSC TDP-247 and is the answer not in the manual?

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)