To Next Page

To Previous Page

 SET FILTER ON/OFF

Description

This command is using to enable/disable commands PREINPUT and POSTINPUT.

Syntax

SET FILTER ON/OFF

Parameter

Description

Enable PREINPUT and POSTINPUT

OFF

Disable PREINPUT and POSTINPUT

Note:

This command has been supported since V6.81 EZ and later firmware.

Example

Sample Code

DOWNLOAD "TEST.BAS"

PREINPUT "<="

POSTINPUT "=>"

SET FILTER ON

START:

INPUT "DATA",data1$

SIZE 4,0.25

GAP 0,0

DIRECTION 1

CLS

TEXT 10,10,"3",0,1,1,"DATA = "+data1$

PRINT 1

GOTO START

EOP

TEST

<=1234=><=5678=><=9012=>

Result

Other manuals for TSC TDP-247

Questions and Answers:

Need help?

Do you have a question about the TSC TDP-247 and is the answer not in the manual?

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)