TSC TDP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. 26 Copyright 2013 All Rights Reserved.
 SOUND
Description
This command controls the sound frequency of the beeper. There are 10 levels of sounds. The timing
control can be set by the "interval" parameter.
Syntax
SOUND level,interval
Parameter
Description
level
Sound level: 0~9
interval
Sound interval: 1~4095
Example
Sample code
 SOUND 5,200
 SOUND 3,200
 SOUND 3,200
 SOUND 4,200
 SOUND 2,200
 SOUND 2,200
 SOUND 1,200
 SOUND 2,200
 SOUND 3,200
 SOUND 4,200
 SOUND 5,200

TSC TDP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)