To Next Page

To Previous Page

Setup and System Commands

 SIZE

Description

This command defines the label width and length.

Syntax

SIZE m,n

English system (inch)

SIZE m mm,n mm

Metric system (mm)

SIZE m dot,n dot

Dot measurement

This command has been supported since V6.27 EZ and later firmware.

Parameter

Description

Label width (inch/ mm/ dot)

Label length (inch/ mm/ dot)

Note :

 200 DPI : 1 mm = 8 dots

300 DPI : 1mm = 12 dots

 For metric and dot systems, there must be a space between parameter and “mm” or “dot”.

Example

Sample Code

 English system (inch):

SIZE 3.5,3.00

 Metric system (mm):

SIZE 100 mm,100 mm

Result

Other manuals for TSC TDP-247

Questions and Answers:

Need help?

Do you have a question about the TSC TDP-247 and is the answer not in the manual?

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)