To Next Page

To Previous Page

 SET USBHOST KEYBOARD/SCANNER

Description

This command can set the USB host for the usage of USB keyboard or scanner

Syntax

SET USBHOST KAYBOARD/SCANNER

Parameter

Description

KAYBOARD

USB keyboard

SCANNER

USB scanner

Note:

 This command has been supported since V6.95 EZ and later firmware.

 This command is for TTP-2410M series, ME240 series, TTP-225 series and TDP-225 series

which has USB HOST connector.

Example

Sample code

SET USBHOST KEYBOARD

SET USBHOST SCANNER

Other manuals for TSC TDP-247

Questions and Answers:

Need help?

Do you have a question about the TSC TDP-247 and is the answer not in the manual?

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)