To Next Page

To Previous Page

 WLAN PORT

Description

This command is used to specify the PORT number of Wi-Fi module. Restart the printer is necessary.

Syntax

WLAN PORT number

Parameter

Description

number

Base raw port number. Default is 9100.

Example

Sample code

WLAN MODE INFRASTRUCTURE

WLAN SSID "TEST-AP"

WLAN WPA "123456789"

WLAN IP "10.0.10.138","255.255.255.0","10.0.10.252"

WLAN PORT 8000

SELFTEST WLAN

Result

Other manuals for TSC TDP-247

Questions and Answers:

Need help?

Do you have a question about the TSC TDP-247 and is the answer not in the manual?

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)