TSC TDP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. 163 Copyright 2013 All Rights Reserved.
 TEXTPIXEL( )
Description
Returns the width of the text string in dot.
Syntax
TEXTPIXEL (cont$,font$,size)
Parameter
Description
cont$
The content of text string.
font $
The font type. Please refer to the parameter font in command TEXT.
size
The font size. Please refer to the parameter x-multiplication in command
TEXT.
Note:
This command has been supported since V6.61 EZ and later firmware.
Example
See Also
TEXT, BARCODEPIXEL()
Sample code
DOWNLOAD "TEST.BAS"
str$="ABCDEFG"
font$="3"
fontsize=3
strwidth=TEXTPIXEL(str$,font$,fontsize)
SIZE 4,1
GAP 0,0
DIRECTION 1
CLS
TEXT 10,10,font$,0,fontsize,fontsize,str$
REVERSE 8,8,strwidth,72
PRINT 1
EOP
TEST
Result

TSC TDP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)