To Next Page

To Previous Page

 LOC( )

Description

This function returns the current read/write position within an open file.

Syntax

LOC(file handle)

Parameter

Description

file handle

0 or 1

Note:

This command has been supported since V6.86 EZ and later firmware.

Example

Sample code

DOWNLOAD "DATA.DAT",30,12345678

12345678

DOWNLOAD "TEST.BAS"

str1$ = ""

location = 0

OPEN "DATA.DAT",0

READ 0,str1$

location = LOC(0)

CLOSE 0

SIZE 4,1

GAP 0,0

CLS

TEXT 10,10,"3",0,1,1,"str1$: "+str1$

TEXT 10,60,"3",0,1,1,"Location:"+STR$(location)

PRINT 1

EOP

TEST

Result

Other manuals for TSC TDP-247

Questions and Answers:

Need help?

Do you have a question about the TSC TDP-247 and is the answer not in the manual?

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)