TSC TDP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. 140 Copyright 2013 All Rights Reserved.
 GOTO
Description
This command is used to branch to a specified label. The label cannot exceed 8 characters in length.
Syntax
GOTO LABEL
:LABEL
Parameter
Description
LABEL
Beginning of the point. The maximum length of the label is 8 characters.
Example
Sample code
DOWNLOAD "GOTO1.BAS"
SIZE 4,3
GAP 0,0
DIRECTION 1
CLS
A=0
TOTAL=0
:START
IF A<100 THEN
GOTO SUM
ELSE
GOTO PRTOUT
ENDIF
:SUM
A=A+1
TOTAL=TOTAL+A
GOTO START
:PRTOUT
B$="THE SUMMATION OF 1..100 IS
"+STR$(TOTAL)
TEXT 10,100,"3",0,1,1,B$
PRINT 1
END
EOP
Result
See Also
DOWNLOAD, EOP, END, GOSUB…RETURN

TSC TDP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)