TSC TDP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. 164 Copyright 2013 All Rights Reserved.
 BARCODEPIXEL( )
Description
Returns the width of barcode in dot.
Syntax
BARCODEPIXEL (cont$, sym$, narrow, wide)
Parameter
Description
cont$
The content of barcode.
sym $
Barcode type. Please refer to the parameter code type in command
BARCODE.
narrow
The width of narrow bar. Please refer to the parameter narrow in command
BARCODE.
wide
The width of wide bar. Please refer to the parameter wide in command
BARCODE.
Note:
This command has been supported since V6.72 EZ and later firmware.
Example
See Also
BARCODE, TEXTPIXEL()
Sample code
DOWNLOAD "TEST.BAS"
cont$="ABCDEFG"
sym$="39"
narrow=2
wide=6
codewidth=BARCODEPIXEL(cont$,sym$,narrow,wide)
SIZE 4,1.5
GAP 0,0
DIRECTION 1
CLS
BARCODE 10,10,sym$,100,1,0,narrow,wide,cont$
REVERSE 8,8,codewidth+8,132
BARCODE 10,160,sym$,100,1,0,narrow,wide,cont$
PRINT 1
EOP
TEST
Result

TSC TDP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)