TSC TDP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. 228 Copyright 2013 All Rights Reserved.
External Wi-Fi Module Setting Commands
 WLAN OFF
Description
This command is used to disable Wi-Fi module. Restart the printer is necessary.
Syntax
WLAN OFF
Note:
We can use command SELFTEST WLAN to check the status of WLAN. The SSID is empty.
Example
Sample code
WLAN OFF
SELFTEST WLAN
Result
See Also
WLAN SSID

TSC TDP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)