To Next Page

To Previous Page

 NET IP

Description

This command is used to set the specific IP address to printer. Printer will restart itself while setting

this command.

Syntax

NET IP "ip","mask","gateway"

Parameter

Description

IP address

mask

Subnet mask

gateway

Default gateway

Example

Sample code

NET IP "192.168.10.40","255.255.255.0","192.168.10.252"

SELFTEST ETHERNET

Result

Other manuals for TSC TDP-247

Questions and Answers:

Need help?

Do you have a question about the TSC TDP-247 and is the answer not in the manual?

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)