TSC TDP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. 32 Copyright 2013 All Rights Reserved.
 DELAY
Description
Let the printer wait specific period of time then go on next command.
Syntax
DELAY ms
Parameter
Description
ms
The specific period of time. Unit is millisecond. 1000 ms = 1 second.
Note:
This command has been supported since V6.34 EZ and later firmware.
Example
Sample Code
SIZE 4,0.7
GAP 0,0
DIRECTION 1
CLS
TEXT 10,10,"3",0,1,1,"The delay time between two labels is 3 seconds."
TEXT 10,60,"3",0,1,1,"Now second:"+@SECOND
PRINT 1
DELAY 3000
PRINT 1
Result

TSC TDP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)