To Next Page

To Previous Page

 EOP

Description

End of program. To declare the start and end of BASIC language commands used in a program,

DOWNLOAD "FILENAME.BAS " must be added in the first line of the program, and "EOP " statement at

the last line of program.

Syntax

EOP

Example

Sample code (The example program listed below will download to printer SDRAM.)

DOWNLOAD "DEMO.BAS"

SIZE 4,4

GAP 0,0

DIRECTION 1

SET TEAR ON

CLS

TEXT 100,100,"3",0,1,1,"DEMO PROGRAM"

PRINT 1

EOP

Other manuals for TSC TDP-247

Questions and Answers:

Need help?

Do you have a question about the TSC TDP-247 and is the answer not in the manual?

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)