TSC TDP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. VI Copyright 2013 All Rights Reserved.
Document Conventions
This manual uses the following typographic conventions.
Convention
Description
[expression list]
Items inside square brackets are optional, expression maximum length 2*1024
bytes.
<ESC>
ASCII 27, control code of status polling command returns/runs the printer
status immediately.
~
ASCII 126, control code of status polling command returns the printer status
only when the printer is ready.
Space
ASCII 32, characters will be ignored in the command line.
"
ASCII 34, beginning and ending of expression.
CR, LF
ASCII 13, ASCII 10, denotes end of command line.
NULL
ASCII 0, supported in the expression.
Note:
203 DPI: 1 mm = 8 dots
The font in bold and italic type is used for note.

TSC TDP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)