TSC TDP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. 97 Copyright 2013 All Rights Reserved.
Message Translation Protocols
 ~#
Description
The beginning identifier (~#) of the prompt message is sent from the printer to the KP-200 portable
keyboard. The ending identifier is ~&. @0 following the ending identifier ~& is used to instruct
keyboard to display the prompt in the first line of LCD display. @1 following the ending identifier ~& is
used to instruct keyboard to display the prompt in the first line of LCD display. If @0 or @1 are not
present, prompt string will be displayed in first line of LCD and input data will be displayed in second
line of LCD.
Syntax
~#Prompt~&[@0]
~#Prompt~&[@1]
Parameter Description
None N/A
Example
Sample code
DOWNLOAD "A.BAS"
OUT "~#KP-200~&@0"
OUT "~#Testing~&@1"
EOP
A
Result
See Also
INPUT, OUT

TSC TDP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)