TSC TDP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. 127 Copyright 2013 All Rights Reserved.
 PUT
Description
One byte is appended into file.
Syntax
PUT file handle,var1$[, var2$][,var3$][, …]
PUT file handle,var1[, var2][,var3][, …]
PUT file handle,var1$[, var2$][,var3][, …]
Parameter
Description
file handle
0 or 1
var$
Data is a character
var
Data is ASCII value
Note:
This command has been supported since V6.91 EZ and later firmware.
Example
Sample code
DOWNLOAD "DATA1",10,1234567890
DOWNLOAD "TEST.BAS"
str1$ = ""
str2$ = ""
OPEN "DATA1",0
SEEK 0,0
READ 0,str1$
PUT 0,"a","B",49
SEEK 0,0
READ 0,str2$
CLOSE 0
SIZE 4,0.5
GAP 0,0
CLS
TEXT 10, 10,"3",0,1,1,"Original data in DATA1: "+str1$
TEXT 10, 60,"3",0,1,1,"New data in Data1: "+str2$
PRINT 1
EOP
TEST
Result
See Also
DOWNLOAD, EOP, OPEN, READ, EOF, LOF(), SEEK, GET

TSC TDP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)