To Next Page

To Previous Page

 WLAN MODE

Description

This command is used to define the wireless operating mode. Restart the printer is necessary.

Syntax

WLAN MODE operation

Parameter

Description

operation

INFRASTRUCTURE: For AP (access point) usage.

AD-HOC: Peer-to-peer mode. *Support static IP and WEP security only.

Example

Sample code

WLAN MODE INFRASTRUCTURE

WLAN SSID "TEST-AP"

WLAN WPA "123456789"

WLAN DHCP

WLAN PORT 9100

SELFTEST WLAN

Result

Sample code

WLAN MODE AD-HOC

WLAN SSID "TEST-AP"

WLAN WEP 1,"12345"

WLAN IP "192.168.1.3","255.255.255.0","192.168.1.1"

WLAN PORT 9100

SELFTEST WLAN

Result

Other manuals for TSC TDP-247

Questions and Answers:

Need help?

Do you have a question about the TSC TDP-247 and is the answer not in the manual?

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)