TSC TDP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. 158 Copyright 2013 All Rights Reserved.
 STRCOMP( )
Description
Returns -1, 0, or 1, based on the result of a string comparison.
Syntax
STRCOMP(str1$,str2$[,comp])
Parameter
Description
str1$
Required. Any valid string expression.
str2$
Required. Any valid string expression.
comp
Optional. Specifies the type of string comparison.
0: Binary comparison. Default.
1: Textual comparison. The comparison is case-insensitive.
Condition
Return value
str1$ sorts ahead of str2$
-1
str1$ is equal to str2$
0
str1$ sorts after str2$
1
Note:
This command has been supported since V6.81 EZ and later firmware.
Example
Sample Code
DOWNLOAD "TEST.BAS"
STR1$ = "ABCD"
STR2$ = "abcd"
result1 = STRCOMP(STR1$,STR2$)
result2 = STRCOMP(STR1$,STR2$,1)
result3 = STRCOMP(STR2$,STR1$)
SIZE 4,1
GAP 0,0
DIRECTION 1
CLS
TEXT 100,10,"3",0,1,1,STR$(result1)+": \["]"+STR1$+"\["] sorts ahead of \["]"+STR2$+"\["]"
TEXT 100,60,"3",0,1,1," "+STR$(result2)+": \["]"+STR1$+"\["] is equal to \["]"+STR2$+"\["]"
TEXT 100,110,"3",0,1,1," "+STR$(result3)+": \["]"+STR2$+"\["] sorts after \["]"+STR1$+"\["]"
PRINT 1
EOP
TEST
Result
See Also
INSTR()

TSC TDP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)