TSC TDP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. 142 Copyright 2013 All Rights Reserved.
 INP( )
Description
One byte (ASCII value) is received from communication port.
Syntax
INP(n)
Parameter
Description
n
1: com1 port in printer
Note:
This command has been supported since V6.91 EZ and later firmware.
Example
Sample code
DOWNLOAD "TEST.BAS"
ascii=0
str$=""
FOR I=1 TO 5
ascii=INP(1)
str$=str$+" "+STR$(ascii)
OUT ascii
NEXT
SIZE 4,0.5
GAP 0,0
CLS
TEXT 10,10,"3",0,1,1,"The received data is: "+str$
PRINT 1
EOP
TEST
12345
Result
See Also
INP$()

TSC TDP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)