TSC TDP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. 213 Copyright 2013 All Rights Reserved.
 DATE
Description
This variable reads/writes the date data via the Real Time Clock (RTC). Two-digit (01~31) date formats
are supported by RTC.
Syntax
Write attribute: DATE = 12
Read attribute: A = DATE
Range: 01~31
Example
Sample code
DOWNLOAD "SetDate.BAS"
REM *****Set Date Parameter to RTC*****
DATE=10
EOP
SetDate
Sample code
DOWNLOAD "DEMO.BAS"
SIZE 4,1
GAP 0,0
DIRECTION 1
CLS
REM *****Read Date parameter form RTC*****
DATE$=STR$(DATE)
D=DATE
REM *****Print*****
TEXT 10,10,"3",0,1,1,"DATE1="+DATE$
TEXT 10,50,"3",0,1,1,"DATE2="+STR$(D)
TEXT 10,90,"3",0,1,1,"DATE3="+STR$(DATE)
PRINT 1
EOP
DEMO
Result
See Also
~!C, MONTH, DATE, DAY, HOUR, MINUTE, SECOND

TSC TDP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)