TSC TDP-247 Programming Manual

TSC AUTO ID Technology Co., Ltd. 195 Copyright 2013 All Rights Reserved.
Execute:
Syntax
Receive “PRINT m”
Print Out
SET PRINTKEY ON or
SET PRINTKEY AUTO
1.) PRINT 2
Label 1~2
2.) Press FEED key
Label 3~4
Syntax
Receive “PRINT m,n”
Print Out
SET PRINTKEY ON or
SET PRINTKEY AUTO
1.) PRINT 1,2
Label 1, Label 1
2.) Press FEED key
Label 2, Label 2
Syntax
Receive “PRINT -1,n”
Print Out
SET PRINTKEY ON or
SET PRINTKEY AUTO
1.) PRINT -1,2
Label 1, Label 1
2.) Press FEED key
Label 1, Label 1
Syntax
Receive “PRINT m”
Print Out
SET PRINTKEY 5
1.) PRINT 2
Label 1~2
2.) Press FEED key
Label 3~7
Syntax
Receive “PRINT m,n”
Print Out
SET PRINTKEY 5
1.) PRINT 1,2
Label 1, Label 1
2.) Press FEED key
Label 2~6
Syntax
Receive “PRINT –1,n”
Print Out
SET PRINTKEY 5
1.) PRINT -1,2
Label 1, Label 1
2.) Press FEED key
Label 1, Label 1

TSC TDP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)