TSC TDP-247 Programming Manual

2012/11/27
Add WHILE … WEND command.
Ernest
2012/11/27
Add DO … LOOP command.
Ernest
2012/11/27
Add TEXTPIXEL() command.
Ernest
2012/11/27
Add BARCODEPIXEL() command.
Ernest
2012/11/27
Add GETSENSOR() command.
Ernest
2012/11/27
Add GETSETTING() command.
Ernest
2012/11/28
Revise SET CUTTER command.
Ernest
2012/11/28
Revise OPEN command.
Ernest
2012/11/28
Revise FOR … NEXT LOOP command.
Ernest
2012/11/28
Add CLOSE command.
Ernest
2012/11/28
Add COPY command.
Ernest
2012/11/28
Add MPDF417 command for Micro PDF 417 barcode.
Ernest
2012/11/30
Add EOJ command.
Ernest
2012/11/30
Add DELAY command.
Ernest
2012/11/30
Add DISPLAY command.
Ernest
2012/11/30
Add XOR$() command.
Ernest
2012/11/30
Add _MODEL$ variable.
Ernest
2012/11/30
Add _SERIAL$ variable.
Ernest
2012/11/30
Add _VERSION$ variable.
Ernest
2012/11/30
Revise LIMITFEED command.
Ernest
2012/11/30
Revise BOX command.
Ernest
2012/11/30
Add SET FEED_LEN command.
Ernest
2012/12/20
Add external Wi-Fi module setting commands.
Ernest
2012/12/20
Add Ethernet setting commands.
Ernest
2012/12/24
Revise DMATRIX command.
Ernest
2012/12/24
Revise LIMITFEED command.
Ernest
2012/12/24
Revise SELFTEST command
Camille
2013/2/5
Add sample result for each section
Camille
2013/2/6
Add CODEPAGE 864 (Arabic) ; since F/W V7.0
Camille
2013/2/26
Add <ESC>!F command.
Camille
2013/2/26
Add <ESC>!. command.
Camille

TSC TDP-247 Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)