What does 'High Pressure (Dry)' mean on Tuttnauer Laboratory Equipment and how do I resolve it?
If your Tuttnauer Laboratory Equipment displays 'High Pressure (Dry)', it means the pressure in the chamber exceeds atmospheric pressure by more than 10kPa at the beginning of the dry stage. To resolve this, perform a new cycle.
What does 'Compressed air supply error (C - cooling) only' mean on my Tuttnauer 5050 and how do I fix it?
If your Tuttnauer Laboratory Equipment displays a 'Compressed air supply error (C - cooling) only' message, it indicates a malfunction in the compressed air supply. This can be due to the compressed air valve not opening because of a faulty connection or a faulty I.O. board, or the compressed air valve itself might be faulty. Check and fix the compressed air supply. If the problem persists, fix the connection, replace the faulty I.O. board, or replace the faulty valve.
What does 'Periodical check time exceeded' mean on Tuttnauer 5050 Laboratory Equipment?
If your Tuttnauer Laboratory Equipment displays 'Periodical check time exceeded - Please call for service', call for service.
Why does the safety relief valve on my Tuttnauer Laboratory Equipment open at a pressure higher than specified?
If the safety relief valve on your Tuttnauer Laboratory Equipment opens at a pressure higher (more than 10%) than specified, the relief valve is likely faulty and needs replacement.
What to do if the printer does not print on my Tuttnauer Laboratory Equipment?
If the printer on your Tuttnauer Laboratory Equipment is not printing, several issues could be the cause. First, ensure that the paper roll is inserted correctly into the printer. If there is still no printing, try switching the machine off and then back on to restart it. If the printer's LED is on, the printer may be faulty and require replacement. Also, check the 24V input to the printer; if there is no input, there may be a discontinuity between the power supply and the printer, or the power supply itself may be faulty. In such cases, fix the discontinuity or replace the power supply.
What does 'Supply water error (digital input option)' mean on my Tuttnauer 5050 and how can I fix it?
If your Tuttnauer Laboratory Equipment displays a 'Supply water error (digital input option)' message, it indicates a malfunction in the city (tap) water supply. To resolve this, check and fix the city (tap) water supply.
What to do if Tuttnauer Laboratory Equipment has a Vacuum Time Error?
If your Tuttnauer Laboratory Equipment displays a Vacuum Time Error, try the following: * Perform a new cycle. * If the problem persists, perform a vacuum test to find any leakage in the autoclave door or pipes.
What does Pressure Time Error mean on Tuttnauer 5050 and how to solve it?
The 'Pressure Time Error' message on your Tuttnauer Laboratory Equipment means that the system cannot reach the required pressure conditions in the chamber, after preset time, during the air removal stage. Verify that the autoclave is not overloaded.
What to do if the chamber temperature is not in range in Tuttnauer 5050?
If the chamber temperature of your Tuttnauer Laboratory Equipment is not within the expected range, wait until the chamber reaches the normal range temperature.
What to do if Tuttnauer 5050 Laboratory Equipment displays ‘High Temp’?
If the Tuttnauer Laboratory Equipment displays ‘High Temp’, clean the water level electrode inside the vessel and check the leveling of the machine.
Overview of the laboratory sterilizer, its models, and features.
Procedures for unpacking and inspecting the autoclave upon receipt.
Details of the product warranty, coverage, and exclusions.
Information on warranty registration and technical service contact.
Lists relevant directives and standards the autoclave complies with.
Details water quality requirements and system utilities.
Covers electrical configurations, operating conditions, and performance.
Includes construction materials, emissions, and dimensions.
Provides detailed model specifications and sticker descriptions.
Diagrams showing the front and rear views of the autoclave.
Diagram of the control panel and its numbered components.
Explains the functions of the UP, DOWN, and START/STOP keys.
Lists and explains operational and error messages and symbols.
Describes the optional printer and its role in the system.
Details the Glass sterilization program parameters and sequence.
Details the Plastic sterilization program parameters and sequence.
Details the Liquid A sterilization program, cautions, and sequence.
Details the Liquid B – Waste sterilization program, cautions, and sequence.
Details the Liquid A – Cooling program parameters and sequence.
Details the Liquid B – Waste Cooling program parameters and sequence.
Details the Bio Hazard 1 program for bio-hazard models.
Details the Bio Hazard 2 program for bio-hazard models.
Details the Bio Hazard Liquids program for bio-hazard models.
Details the Vacuum Test program for PV models.
Details the Warm-Up program for pre-warming the chamber.
Details the Isothermal program for liquids, agar, pasteurization.
Details the Air Mixture program for liquids in soft packages.
Details the Glass Test program for checking bottle durability.
Details the Durham program for liquids.
Illustrates screens shown after a successful sterilization cycle.
Shows screens for cycles aborted after sterilization.
Illustrates screens indicating a general cycle failure.
Instructions for browsing menus and changing parameters.
Accessing quick options, setting date/time, and system parameters.
Details on managing cycle parameters like Dry Time.
Information on printer output content and paper handling.
Guidelines for treating thermal papers and powering off the printer.
Guidelines for preparing instruments, tubing, and liquids.
Instructions for filling the autoclave's water reservoir.
Steps for turning on the autoclave and opening/closing doors.
How to start, run, and unload the autoclave cycle.
Instructions for setting a future start time for the sterilization cycle.
Covers daily, weekly, periodic maintenance and tests.
Instructions for draining the reservoir and cleaning the strainer.
Guidance on checking safety valves and moving the autoclave.
Addresses issues with display, printer, sensors, and range errors.
Covers system, cycle, pressure, and time-related errors.
Addresses errors related to jacket temp, maintenance, water, vacuum, and cycle counts.
General| Brand | Tuttnauer |
|---|---|
| Model | 5050 |
| Category | Laboratory Equipment |
| Language | English |
To Next Page