104 Other settings and functions
Programming call forwarding
Standard call forwarding
You can forward calls for your phone to another phone. You can also change,
activate and deactivate call forwarding during a call.
Three forwarding conditions can be programmed in the forwarding menu:
• Uncond’l
• Busy
• On No reply (xs)
Because of its direct impact, "Uncond’l" call forwarding has the highest priority
followed by "No reply" and then "Busy".
If active, "Uncond’l" call forwarding is indicated on the display when the phone
is idle.
Forwarded calls can be logged in a call list (see
page 25).
The Forwarding menu offers you three types of call forwarding.
Uncond’l Destination phone number
Busy Destination phone number
No reply (xs) Destination phone number
A phone number may already be assigned to each call forwarding type. For ex-
ample, a Destination could then be Destination 12345.
Using call forwarding
The following functions are available for activating and deactivating call forward-
ing and configuring it in accordance with your requirements:
• ”Activating or deactivating immediate call forwarding” page 105
• ”Saving destination phone numbers for call forwarding” page 106
• ”Editing favorites” page 107
• ”Copying and pasting destination phone numbers” page 107
• ”Assigning a destination phone number for call forwarding” page 108
• ”Activating/deactivating call forwarding” page 109
• ”Defining the ring duration before call forwarding on no reply” page 110
ñ
Depending on the settings made by the administrator, standard call for-
warding may be configured for the phone or alternatively a forwarding call
by type option that is supported by OpenScape Voice .
The Forwarding function must be approved by the administrator.
On multi-line telephones ( page 71), you can only configure call forward-
ing for the primary line.
Alternatively, call forwarding can be programmed on one or more keys with
a fixed destination and a predefined forwarding or call type page 62.
To Next Page
Loading...
