Web interface (WBM) 143
Web interface (WBM)
General
You can configure a number of settings for your phone via the web interface. Communication is
via a secure HTTPS connection. Access to the web interface must be activated by your adminis-
trator.
Launching the web interface
To launch the interface, open a web browser and enter the following:
https://[IP address of the phone]
[IP address of the phone] is the IP address of your phone.
or
https://[Name of the phone]
[Name of the phone] that was assigned by the administrator.
Administrator Settings
This area lets you configure settings for administering your phone and the network environment.
Access to the Administrator Settings is protected by the admin password. For further information,
consult your administrator or refer to the administration manual.
For more information about the IP address, the web interface address and how to connect
the telephone to the network, refer to the section entitled "Network information" page 102.
You might receive a certificate notification from the browser. Follow the instructions to down-
load the certificate.
You will be prompted to configure a user password page 85 the first time you call up the
web interface. You must log in with this password the next time you want to open the User
settings.
To Next Page
Loading...
Need help?
General
