Other settings and functions 109
Activating/deactivating call forwarding
Prerequisite: A forwarding destination is already configured for the relevant for-
warding type.
Select and confirm the option shown
The pop-up menu opens:
The message:
"Set forward on to" is displayed with the number of the last forwarding destina-
tion and you have the following options:
• Accept
• Set a forwarding destination
• Edit call forwarding
• Cancel
Select and confirm the option shown within 3 seconds.
Choose one of the forwarding types offered:
Uncond’l: 3339 (deactivated is the default setting)
Busy: 3335
No reply (xs): 3336
and confirm your selection. Here for example Uncond’l.
Select and confirm the option shown. Call forwarding is activated. This type of
call forwarding is deactivated with Turn off.
The call forwarding settings can appear as follows:
Uncond’l: 3339 (deactivated is the default setting)
Busy: 3335
No reply (xs): 3336
@ Press the key to open the call display. If Uncond’l was activated, the forwarding
destination is displayed with the forwarding icon and the Forwarding notification
illuminates. The Busy and No reply (xs) types of call forwarding are not dis-
played.
Call forward? f
Edit call forwarding? f
Uncond’l: 3339 l
Turn on: l
To Next Page
Loading...
