Getting to know the OpenScape Desk Phone CP200/CP205 18
Programmable function keys
Your OpenScape Desk Phone CP200/CP205 has three fixed function keys (with LED), which you
can reprogram with different functions or phone numbers at any time.
The icons represent the following functions:
• Directory
• Built-in forwarding
• Repeat dialing
Depending on how they are programmed, you can use the keys as follows:
• Function keys page 59
• Selected dialing keys page 60
A function can be programed for each key as well as a phone number at the second level.
The status of a function is shown by the display notification for the corresponding function key.
Meaning of LED notifications
Line and direct station selection (DSS) keys can only be programmed by the administrator
via the program/service menu.
You will find information on the labeling of the function keys on page 149
LED Meaning
Off – The line is in idle mode.
Red quick
pulsing
1
1 In this manual, flashing keys are identified by this icon, regardless of the flashing in-
terval. The flashing interval represents different statuses, which are described in de-
tail in the corresponding sections of the manual.
– Incoming call on the line.
– The line is on "Hold".
Red solid – The line is busy.
Some of the programmable keys on multi-line phones can be set up as trunk or line keys
page 71.
To Next Page
Loading...
