Unify OpenScape CP200 - Activating;Deactivating Immediate Dialing

122 Other settings and functions
Activating/deactivating immediate dialing
Immediate dialling is deactivated by default. For this reason after entering the
number you must either confirm the "Dial" option or wait until the dial delay ex-
pires to set up the connection. If Immediate dialling is configured, your call is
automatically dialed as soon as the string entered matches an entry in the dial
plan.
z You can also configure this setting via the WEB interface  page 143.
@ Press the key shown.
Select and confirm the option shown.
if nec. j Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Confirm the option shown.
ñ
Immediate dialling should only be activated if your administrator has con-
figured and approved a dial plan.
User
Configuration
Outgoing calls
Immediate dialling = No f
Yes l
Save & exit l