Making calls 43
Ending a consultation call
You end the consultation
Select and confirm the option shown.
The consultation call is disconnected. The call with the first party is resumed.
The second party hangs up
If the second party hangs up, you will be prompted to retrieve the first call again
if "Hold and hang-up" is disabled ( page 115). Otherwise, the first call will re-
main on hold until you receive this prompt after a defined time interval.
Confirm the option shown. You are reconnected with the first party.
Switching to the held party (alternating)
Prerequisite: You are conducting a consultation call page 42 or have accept-
ed a second call page 46.
Select and confirm the option shown.
In the first display line, the phone number or name and the duration of the active
connection are displayed.
Ending an alternate operation
Select and confirm the option shown.
The active call is disconnected and the held call is restored.
Conference
Prerequisite: You are conducting a consultation call page 42 or have accept-
ed a second call page 46 and the conference function is active page 123.
Establishing a conference
{ or }
Select and confirm the option shown in the context menu. You are connected to
both parties at once.
Disconnect & return? f
Retrieve held call
If the call is kept on hold, you can retrieve the call via the context menu
before the set time expires.
Alternate? l
You can switch back and forth between two subscribers by repeatedly se-
lecting and confirming "Alternate".
Disconnect & return? f
If you are already involved in a secure connection with a party when you
initiate a consultation call, the original party is placed on hold. The new
consultation connection can be either secure or unsecured. However, the
first connection remains secure even if all three parties are now joined to-
gether in a conference.
The entire conference is nonsecure if the connection to at least one of the
parties is not secure.
The relevant padlock icon appears in the "Conference" row.
Conference?
To Next Page
Loading...
