70 Making calls in the team
Rejecting a call
Press the DSS key. The call is routed to your primary line and rings.
Select and confirm the option shown in the pop-up menu.
The caller hears a busy signal.
Direct pickup
Prerequisite: The auto-answer function is activated page 112.
Press the DSS key. The call is routed to your primary line and you are immedi-
ately connected with the other party via speakerphone.
Deflecting a call to a DSS subscriber
Prerequisite: The deflect function must be approved for DSS keys. For informa-
tion on the current setting, see page 117.
If you receive a call on one of your lines, you can immediately deflect it to the
DSS subscriber.
Your phone rings and a line key flashes.
Press the relevant DSS key. The call is deflected to the DSS subscriber. If the
DSS subscriber does not answer, you can pick up the call by pressing the DSS
key.
Display notification
The display of the status label will be controlled by the state of the key. Line or
function key can be pulsing or inverted similar to a LED.
ñ
The administrator must activate the reject option for DSS keys and auto-
answer must be deactivated page 112.
DSS 1
_
Reject f
DSS 1
_
DSS 1
_
DSS 1
_
DSS key meaning
Off: The phone is in idle mode.
Blinking: You can accept a call for the DSS subscriber via the
key. The call is routed to your primary line when the call is accept-
ed.
My line
DSS 1 DSS 2
To Next Page
Loading...
