Making calls 35
Rejecting a call
You can reject an incoming call.
An incoming call is displayed or signaled.
Select and confirm the option shown.
The caller hears a busy signal.
Deflecting a call
Prerequisite: An incoming call is displayed or signaled. "Deflect" must be al-
lowed.
Select and confirm the option shown.
If a destination phone number is stored ( page 117), you can select and con-
firm it. The call is deflected.
or If you did not set a phone number when programming call deflection, you are
now prompted to enter a destination phone number for call deflection.
j Enter and confirm the destination phone number. The call is deflected.
Responding to a callback
Prerequisite: A callback was requested. Your phone rings and the subscriber
information appears on the screen.
Accepting a callback
Select and confirm the option shown.
Rejecting a callback
Select and confirm the option shown.
The callback request is deleted. The caller's phone number is added to the
missed calls list.
Forwarding a callback (not OpenScape Voice)
Select and confirm the option shown.
j Enter the phone number and confirm.
ñ
"Reject" must be authorized by the administrator.
Release? f
If the rejected caller's phone number is transmitted, it is saved in the call
list. You can then call this party back at a later time.
Deflect m
089008844 l
ñ
The Reject and Deflect functions are authorized by the administrator.
Accept l
Reject? f
Deflect? m
To Next Page
Loading...
