EasyManua.ls Logo

Unify OpenScape CP200 - Making Calls; Off-Hook Dialing; On-Hook Dialing

Unify OpenScape CP200
165 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36 Making calls
You can also use enhanced functions, such as call lists or the personal or cor-
porate directory, in order to call a subscriber page 52.
Making calls
Off-hook dialing
^ Lift the handset.
j Enter the phone number. If necessary, correct input using the navigation keys
page 17.
Confirm or wait until the dial delay expires (see page 39).
or
Confirm the option shown
1
. ## represents the last number dialed.
The connection is set up.
On-hook dialing
The connection is set up with on-hook dialing or via the loudspeaker (speaker-
phone mode).
: Press the key shown.
j Enter the phone number. If necessary, correct input using the navigation keys
page 17.
Z Press or wait until the dial delay expires (see page 39).
or
Confirm the option shown
2
. ## represents the last number dialed.
Entering the phone number first
First enter the phone number. The LED notification illuminates when you enter
the first digit.
If you allowed the option "Busy When Dialing" page 121, you will not be
interrupted by an incoming call. In this case, the caller hears the busy sig-
nal.
Dial
Redial x ##? l
1. Please note the information in relation to the call log page 37.
If you are using a dial plan and Immediate dialling is set up (see
page 122), dialing is automatically performed as soon as the character
string entered matches an entry in the dial plan.
If a connection is temporarily unreachable, you will hear a special informa-
tion tone (short tone sequence). The fault can be rectified quickly, so try
again to dial this phone number after an appropriate time.
Redial x ##? l
2. Please note the information in relation to the call log page 37.

Table of Contents

Other manuals for Unify OpenScape CP200

Related product manuals