58 Programmable keys
Programmable keys
The phone features a range of functions that can, if required, be stored on pro-
grammable keys. The phone comes with three programmable keys, all of which
can be programmed on two separate levels.
You should assign the "Shift" function to one of these keys to be able to switch
between the two key levels. The other possibility to access the second level
function is by long pressing the key (5 seconds).
The keys are preassigned in the as-delivered state (see page 18).
The kez can be programmed on the phone page 59.
The keys can also be programmed via the WEB interface ( page 143).
List of available functions
Previously, you had to have a separate Shift key programmed to access a
function on the second level. On the OpenScape Desk Phone CP100, this
means that one of three programmable keys can not be used by the user.
With this new feature, it is no longer necessary to program a "Shift key" on
the OpenScape Desk Phone CP100.
ñ
This function must be activated by the administrator.
1. Unallocated 27.Redial
2. Selected dialling 28.Personal directory
3. Repeat dialling 29.Group pickup
4. CF unconditional 30.Repertory dial
5. CF no reply 31.Line
6. CF busy 32.Feature toggle
1
1 The feature is not available on an OpenScape 4000 telephone system. See also
page 162.
7. CF unconditional - any 33.Mobility
8. CF no reply - any 34.Directed pickup
9. CF busy - any 35.Release
10.CF unconditional - ext. 36.Callback
1
11.CF unconditional - int. 37.Cancel callbacks
1
12.CF no reply - ext. 38.Consultation
13.CF no reply - int. 39.DSS
14.CF busy - ext. 40.Call waiting
15.CF busy - int. 41.Immediate ring
1
16.Ringer off 42.Call recording
1
17.Build in fwd 43.Shift
18.Alternate 44.Server feature
19.Blind transfer call 45.BLF
20.Transfer call 46.Send URL
21.Deflect 47.2nd alert
22.Do not disturb 48.Corporate directory
23.Show phone screen 49.Call log
24.Broadsoft call center 50.Directory
25.Preview 51.Unllocated
26.Recording on/off
To Next Page
Loading...
