72 Making calls in the team
Notification on display
The display of the status label will be controlled by the state of the key. Line or
function key can be pulsing or inverted similar to a LED.
Incoming calls
Depending on your individual settings, you will be notified of incoming calls
page 90.
Answering calls for the primary line
In this case, the telephone behaves in the same way as a single-line telephone
page 34.
Answering calls for secondary lines
Prerequisite: The secondary line is configured on your multi-line telephone.
Using the handset
^ Lift the handset.
[ Conduct call.
Using the line keys
Press the line key above which the text label flashes or is shown inverse.Speak-
erphone mode.
or
Confirm the option shown. Speakerphone mode.
LED Meaning
Off – The line is in idle mode.
Red quick
pulsing
1
1 In this manual, flashing keys are identified by this icon, regardless of the flashing in-
terval. The flashing interval represents different statuses, which are described in de-
tail in the corresponding sections of the manual.
– Incoming call on the line.
– The line is on "Hold".
Red solid – The line is busy.
My line
Line 2 Line 3
The line that rings is automatically selected. If calls are ringing on more
than one line, you will be connected to the line that has been ringing the
longest.
Line 1
_
Accept? l
To Next Page
Loading...
