Making calls in the team 69
Direct station selection keys
Apart from line keys, the administrator can also configure direct station selection
(DSS) keys. You can use a DSS key to call an internal station directly, pick up
calls for this station or forward calls directly to it.
Calling a subscriber directly
You cannot use DSS if the user is on another call.
Calling from the idle menu
Press the relevant DSS key. The notification lights up and a connection is estab-
lished.
Consultation with the DSS subscriber
Prerequisite: You are conducting a call.
Press the relevant DSS key for the consultation. The notification above the key
lights up and a connection is established. If the subscriber answers, you can tog-
gle, transfer the first call or initiate a conference.
Call pickup
You can pick up calls for the DSS subscriber. If a call is waiting on their line, the
notification flashes.
Indirect pickup
Prerequisite: The auto-answer function is deactivated page 112.
Press the DSS key. The call is routed to your primary line and rings.
^ or : Lift the handset or press the : key. You are connected with the other party.
This function is not available to you on an OpenScape 4000, see
page 162.
DSS 1
_
The administrator can configure the DSS key so that the connection is also
established when the DSS subscriber has activated do-not-disturb or call
forwarding.
ñ
The DSS key is configured by the administrator for consultations.
DSS 1
_
If the administrator has configured transfer instead of consultation, you
can only transfer the current call to the DSS subscriber.
DSS 1
_
To Next Page
Loading...
