34 Making calls
Making calls
Incoming calls
The telephone rings if the ringtone is active. The Signalisierungs LED also flash-
es. If transmitted, calling party information (name, phone number) appears on
the display.
Answering a call via the handset
The phone rings. The caller is displayed.
^ Lift the handset.
if nec. " Adjust the call volume.
Answering a call via the loudspeaker (speakerphone
mode)
The phone rings. The caller is displayed.
Confirm the option shown.
or
: Press the key shown. The speakerphone function is activated.
if nec. " Adjust the call volume.
Suggestions for using speakerphone mode:
• Adjust the call volume while speakerphone mode is active.
• The ideal distance between the user and the phone in speakerphone mode is
50 cm.
Any settings you are currently making on the phone will be interrupted by
an incoming call. You can use the @ key at any time to return to the
point in the menu where you were interrupted, unless the time for the pass-
word has expired.
ñ
If you have set a pattern melody page 91 or a ringer page 79 on your
phone, it is possible that your administrator may have preset a different
ringer depending on the call type (e.g. an external or internal call).
If the phone number is stored in the local telephone, the associated name
is shown on the display (must be activated by the administrator).
Accept? l
To Next Page
Loading...
