Unify OpenScape CP200 User Manual

Other settings and functions 91
Select and confirm the option shown.
Pattern melody
z You can also configure this setting via the WEB interface  page 143.
Prerequisite: You have chosen the "pattern" ringer, see  page 90.
@ Press the key shown.
Select and confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the required pattern melody
[
1
]
between 1 and 8 (e.g. 4). You
will immediately hear the corresponding Ringer melody. Confirm the selected
Ringer melody.
Select and confirm the option shown.
Pattern sequence
z You can also configure this setting via the WEB interface  page 143.
Prerequisite: You have chosen the "pattern" ringer, see  page 90.
@ Press the key shown.
Select and confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select the required Ringer sequence in the context menu between 1 and 6 (e.g.
2). You will immediately hear the set Ringer melody with the selected Ringer se-
quence. Confirm the selected setting.
Select and confirm the option shown.
1. The phone displays the current setting
Save & exit l
User
Audio
Settings?
Ringer melody = 2 f
Save & exit l
User
Audio
Settings?
Ringer sequence = 2 f
Save & exit l

Unify OpenScape CP200 Specifications

General

Wall Mountable	Yes
Type	IP Phone
Power Supply Options	PoE or external power adapter
Connectivity	10/100 Base-T Ethernet
Power over Ethernet	Yes, IEEE 802.3af
Keys	Programmable keys
Keypad	12-key numerical keypad
Speakerphone	Yes
Headset Port	RJ9
Lines	2 lines
Supported Protocols	SIP
Ethernet Ports	2