48 Making calls
If a destination phone number is stored ( page 117), you can select and con-
firm it. The call is deflected.
or If you did not set a phone number when programming call deflection, you are
now prompted to enter a destination phone number for call deflection.
j Enter and confirm the destination phone number.
The second call is deflected to the destination specified. You are reconnected
with the first party.
Connecting parties
Select and confirm the option shown. The other two parties are now connected
to one another. You can now hang up or dial another number for instance.
or Connecting by hanging up
] or É
Replace the handset or, if you are in speakerphone mode, press the loudspeak-
er key. The other two parties are now connected to one another.
Transferring a call
You can transfer your current call to another party with or without consultation.
Prerequisite: You are conducting a call. The options "Allow call transfer" and
"Transfer on ring" are allowed ( page 119).
Blind transfer
You can transfer via the menu.
Select and confirm the option shown.
j Enter the phone number of the second party to whom you want to transfer the
call. You can also select and call a subscriber here from a call list or from one of
the two directories page 52.
Z Confirm or wait until the autodial delay expires.
The display returns to idle following successful transfer.
Transferring with consultation
You can announce a call to a recipient before transferring it.
You can transfer via the menu.
Select and confirm the option shown. The call is placed on hold.
j Enter the phone number of the party to whom you want to transfer the call. You
can also select and call a subscriber here from a call list or from one of the two
directories page 52.
Announce the call you want to transfer.
Select and confirm the option shown.
Complete Xfer
ñ
Connecting by hanging up is activated (consult your administrator) and
"Switch assignment" must be set to "Yes" ( page 119).
Transfer? f
Consultation? l
Complete Xfer? f
To Next Page
Loading...
