Other settings and functions 135
• You place the active line on hold during the call recording and then resume the
call on this line.
• You seize a different line during call recording. The first line is placed on man-
ual hold.
Prerequisite: The telephone has more than one line configured. The active call
is being recorded. The recording button LED is lighting.
Holding and retrieving the call on the line
[ You are conducting a call, for example on line A. You hear a beep and the re-
cording symbol | is shown on the display. The call is now being recorded.
Press line key A. The line key above which the text label flashes or is shown in-
verse. The call is now on hold. The recording is paused while the call is on hold.
The recording symbol | on the display disappears.
Retrieving a held call:
Press line key A. The line key above which the text label flashes or is shown in-
verse. The call is retrieved. You hear a beep and the recording symbol | is
shown on the display again. Call recording is continued.
Holding a call on the line and conducting a call on a different line
Press line key B – the line key above which the text label flashes or is shown
inverse. You hear a beep and the recording symbol | is shown on the display
for line B – this call on line B is being recorded. Line A is placed on hold, call
recording of line A has been terminated.
Press line key A to resume the call. You hear a beep and the recording symbol
| is shown on the display for line A – a new recording of line A commences.
Line A
_
Line A
_
Line B
_
Line A
_
To Next Page
Loading...
