Utax CD 1020 - Page 91

1-4-43
2AV/X
Description
Maintenance
item No.
1-4
U342 Setting the ejection restriction
Description
Sets or cancels the restriction on the number of sheets to be ejected continuously when the internal eject
tray is selected as the eject location.
Purpose
According to user request, sets or cancels restriction on the number of sheets.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select ON or OFF using the cursor up/down keys.
Sets restriction on the number of sheets
Cancels restriction on the number of sheets
Display
ON
OFF
Description
250
150
100
Condition
When no optional ejection
device is installed
When the job separator or
duplex unit is installed
When the finisher is installed
Number of sheets
Details of restriction (number of sheets to be ejected continuously
after the start key is pressed)
3. Press the start key.
Completion
Press the stop/clear key at the screen for selectiong an item. The screen for selectiong a maintenance item
No. is displayed.
U343 Switching between duplex/simplex copy mode
Description
Switches the initial setting between duplex and simplex copy.
Purpose
To be set according to frequency of use: set to the more frequently used mode.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select ON or OFF using the cursor up/down keys.
Duplex copy
Simplex copy
Display
ON
OFF
Description
Initial setting: OFF
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.