Printer
ADVANCED OPERATION GUIDE 3-3
3
Setting of Alternative Emulation
When you have selected [KPDL(Auto)] as emulation mode, you can switch
between KPDL and another emulation mode (alternative emulation)
automatically according to the data to print. The alternative emulation you
can set is [Line Printer], [IBM Proprinter], [DIABLO 630], [EPSON LQ-850],
[PCL6]* and [KC-GL] (*: Default setting).
Use the procedure below to select the alternative emulation.
1
Press the System Menu Key.
2
Press [Printer] > [Change] in Emulation > [KPDL(Auto)] > [Alt Emulation].
3
Select the desired
alternative
emulation.
4
Press [OK].
5
Press the Power key, and after confirming that the Power key/indicator
and memory indicator have turned off, turn the main power off and on.
Setting of KPDL error report
When an error has occurred during printing in KPDL emulation mode, set
whether or not the error report is output. The default setting is Off (not
output).
Use the procedure below to specify the KPDL error report setting.
1
Press the System Menu Key.
2
Press [Printer] > [Change] in Emulation > [KPDL] or [KPDL(Auto)] > [KPDL
Error Report].
Status 10/10/2007 10:10
Printer - Emulation
Set alternative emulation for KPDL (Kyocera Page Description Language ).
Cancel OK
PCL6
IBM
Proprinter
Line Printer DIABLO 630 EPSON
LQ -850
KC-GL
To Next Page
Loading...
Need help?
General
