Copying Functions
1-42 ADVANCED OPERATION GUIDE
Density Adjustment
Copy density is adjustable.
The table below shows the available settings.
NOTE: You may choose Auto mode as the default setting (refer to
Density on page 6-26).
Follow the steps as below for density adjustment.
1
Place the originals on the platen.
2
Press the Copy key.
3
Press [Image Quality] and then [Density].
4
To adjust density manually, press [-3] - [+3] (Lighter - Darker).
You can change the density level [-3] - [+3] (Lighter - Darker) by half a step.
To change density
automatically, press
[Auto].
5
Press [OK].
6
Press the Start key to start copying.
Mode Description
Manual Density is adjustable to either 7 or 13 different
levels.
Auto Optimum density is selected depending on
density of original.
Status 10/10/2007 10:10
Ready to copy.
Copies
Add Shortc ut Canc el O K
Darker
Dens ity
Auto
0 +1 +2 +3-1-2-3
1
Press [OK] to display
Norm alLighter
-2.5 -1 .5 -0. 5 +0.5 +1 .5 +2 .5
the image.
To Next Page
Loading...
Need help?
General
